Wallpaper is a great way to add personality and character to any room in your home, and the bathroom is no exception. However, wallpapering a bathroom can be a bit more challenging than wallpapering other areas of your home because of the humidity and moisture. In this article, we will go over the steps to properly wallpaper a bathroom.
Step 1: Choose the Right Wallpaper
The first step is to choose the right wallpaper for your bathroom. You should choose a wallpaper that is specifically designed for bathrooms or has a vinyl coating. This type of wallpaper is resistant to moisture and can be easily wiped down with a damp cloth. Avoid using regular wallpaper in the bathroom as it can easily peel off due to the high humidity.
Step 2: Prepare the Walls
Before you start wallpapering, you need to prepare the walls. Remove any old wallpaper, and if there are any holes or cracks, fill them in with spackle or putty. Sand the walls to make sure they are smooth and even. Clean the walls thoroughly with soap and water, and then let them dry completely.
Step 3: Measure and Cut
Measure the height and width of your bathroom walls, and then cut the wallpaper accordingly. It’s important to leave a little extra at the top and bottom for trimming. Make sure to match up the pattern before cutting.
Step 4: Apply Wallpaper Paste
Apply wallpaper paste to the back of the wallpaper using a roller or brush. Make sure to apply enough paste to cover the entire back of the paper. Fold the paper in half with the paste sides together and let it sit for a few minutes to activate the adhesive.
Step 5: Hang the Wallpaper
Starting at the top of the wall, align the wallpaper with the ceiling and use a smoothing brush or squeegee to press it firmly into place. Smooth out any air bubbles as you go. Continue hanging the wallpaper, making sure to match up the pattern as you go.
Step 6: Trim the Edges
Once you have hung all of the wallpaper, trim the edges using a sharp knife and a straight edge. Be careful not to cut too close to the edge, as this can cause the wallpaper to peel off over time.
Step 7: Finish with a Sealer
Once you have trimmed the edges, finish with a sealer to protect the wallpaper from moisture. There are many sealers available on the market that are specifically designed for bathrooms. Follow the manufacturer’s instructions for application.
Tips for Wallpapering a Bathroom
1. Take your time – Wallpapering a bathroom can be time-consuming, so make sure you have plenty of time set aside to complete the project.
2. Work in sections – It’s easier to work in small sections rather than trying to hang an entire wall at once.
3. Use a level – Make sure your wallpaper is level as you hang it to avoid crooked seams.
4. Smooth out air bubbles – Use a smoothing brush or squeegee to smooth out any air bubbles as you go.
5. Let the wallpaper dry completely – Make sure to let the wallpaper dry completely before using your bathroom again.
Wallpapering a bathroom can be a fun and rewarding project that adds personality and character to your home. By choosing the right type of wallpaper, preparing your walls properly, and following these steps, you can successfully wallpaper your bathroom and enjoy it for years to come.
